Group

46/19X1/4TC - Double Overlap cutter

46/19X1/4TC
€60.41

Roughing cutter which leaves an overhang of 3mm, for secondary final trimming.

  • Life can be extended by varying height of cutter.
D
12.7 mm
C
1 inch
C
25.4 mm
B
19 mm
A
90 degrees
OL
67 mm
Shank Diameter
1/4 inch
Product Image Product Ref Diagram No Description Quantity Required Price for 1
B19A - Bearing 3/4 diameter 3/16" bore B19A

Bearings are shielded to prevent penetration of dust and grease packed for life.

  • They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure.
  • Scrape off any resin build-up.
  • Always check the tightness of the fixing screw before using cutter.
€12.71
SP-C - Spare part pack SP-C

Spare part packs make ordering spares easier.

  • Packs include, hex key (if required), screw, washer and shield (if required).
€4.26

Videos

Bearing Guided Cutter Video

Our video guide on how to use your bearing guided cutters, the different types and applications.

Product Questions

Write Your Own Question
Your Question: