We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Frequently Asked Questions
CNC Machining FAQs
All Smartbench variants will work with Macbooks however they will need to use https://www.parallels.com/uk/products/desktop/ or a similar product to use Smart Transfer and some CAD apps like Vectric.
Yes it does have continuous movement.
The movement range on the Trend CNC Smart Machining Centre is:
CNC/SMART1300: x axis 860mm y axis 1420mm z axis 90mm.
CNC/SMARTFAST: x axis 860mm y axis 1420mm z axis 90mm.
CNC/SMARTPLUS: x axis 860mm y axis 920mm z axis 90mm.
The weight of the CNC Smart Machining Centre is:
CNC/LITE/T10: 200KG
CNC/SMARTPLUS: 350KG
CNC/SMART1300: 420KG
CNC/SMARTFAST: 350KG
The CNC SMART requires one 240 volt supply to operate. Two of 240 volt supplies are required if using a vacuum pump.
Yes this is possible but the cost may be prohibitive.
This is possible at the time of installation and not as a retro fit.
The HF motor unit has variable speed control up to 18000 rpm.
Unfortunatley, we have discontined our indiustrial range of spindle moulder tooling. Please discuss requirements with C P Tooling 01748 897170.