Group

LOCK/JIG - Trend Lock Jig

LOCK/JIG
€102.98

Contractor jig with interchangeable templates for use with a plunge router to cut the mortise & face-plate recess for popular door locks.

  • For most common sash mortises & dead locks, with up to 3 inch deep mortises & a 7/8 inch or 1 inch face-plate.
  • Deeper mortises can be achieved with a suitable size of auger bit.
  • Fast, clean & accurate results on doors 34mm to 58mm thick, even in hardwood.
  • Steel plates & body.
  • An auger bit and drill is required to complete deep mortises.
  • The jig requires a 1/2- inch plunge router with a 80mm plunge, fitted with a 30mm guide bush with 6mm spigot & 12mm diameter long reach cutter. A 1/4-inch plunge router can be used for the face plate but will not achieve full depth of mortise.

Contractor Lock Jig

A site-tough routing jig with interchangeable templates to cut lock & face-plate recesses in timber doors. Steel construction and tool-free setup deliver speed and accuracy. Ideal for all popular mortice sash locks, dead locks and latches.  

Steel Construction

Interchangable Lock Templates

Centering Insert Ensures Perfect Position

Guide Bush Collar Conversion

Full Length Alloy Fence

Thumb Turn Quick-Relese

Key Applications

B

U

C


Features

Steel Construction for maximum strength, durability and accuracy.

Full-Length Fence secured with three locking levers adjusts the jig quickly and securely for all doors between 34mm and 58mm thick.

Thumb-Turn Quick-Release Clamps with non-marring pads, secure the jig quickly and easily.

17 Interchangeable Templates to fit all common lock case (5 templates) and face plates (12 templates).

Centering Insert ensures jig is perfectly positioned on any door

Guide Bush Collar converts the GB160 to a 30mm Guide Bush, minimising setup time.

Reference Chart provides quick reference between templates and lock sizes

2mm Height Spacers can be adjusted to accommodate different guide bush spigots.

Requires a router (½”/12mm collet with 80mm plunge), cutter (½”/12mm shank x 12mm cut diameter x 63mm cut length) and guide bush (30mm diameter x 6mm spigot).


Details

  • Steel Construction for maximum strength, durability and accuracy.

  • Full-Length Fence secured with three locking levers adjusts the jig quickly and securely for all doors between 34mm and 58mm thick.

  • Thumb-Turn Quick-Release Clamps with non-marring pads, secure the jig quickly and easily.

  • 16 Interchangeable Templates to fit all common lock case (4 templates) and face plates (12 templates).

  • Centering Insert ensures jig is perfectly positioned on any door

  • Guide Bush Collar converts the GB160 (supplied with Trend Hinge Jigs) to a 30mm Guide Bush, minimising setup time.

  • Reference Chart provides quick reference between templates and lock sizes

  • 2mm Height Spacers can be adjusted to accommodate different guide bush spigots.

  • Requires: router (½”/12mm collet with 80mm plunge), cutter (½”/12mm shank x 12mm cut diameter x 63mm cut length) and guide bush (30mm diameter x 6mm spigot).


Featured Products

LOCK/JIG
Contractor Lock Jig

A site-tough routing jig with interchangeable templates to cut lock & face-plate recesses in timber doors. Steel construction and tool-free setup deliver speed and accuracy. Ideal for all popular mortice sash locks, dead locks and latches.



Related Products


Discover more about Trend Door Hanging Solutions

Explore the Skeleton Hinge Jig

SpotlightSpotlight

Door Hanging Products

Shop Shop

Door Hanging Videos

Watch Watch
Door thickness min.
34 mm
Door thickness max.
58 mm
Template outer size
234.3 x 59.8 x1.5mm

Lock faceplate sizes

Metric D x OL (Imperial D x OL approx.).
Template
22.2x156 mm (7/8"x 6 1/8")
1
22.5x152.5 mm (7/8"x 6")
2
25.4x121 mm (1"x 4 3/4")
3
25.4x127.5 mm (1"x 5")
4
25.4x133.5 mm (1"x 5 1/4")
5
25.4x145 mm (1"x 5 3/4")
6
25.4x153 mm (1"x 6")
7
25.4x156.5 mm (1"x 6")
8
25.4x165.5 mm (1"x 6 1/2")
9
25.4x177 mm (1"x 7")
10
25x57.5 mm (1"x 2 1/4")
11 UPPER
26x56.5 mm (1"x 2 1/4")
11 LOWER
25.6x162mm (1"x 6 3/8")
12

Lock mortise sizes

Metric D x OL (Imperial D x OL)
Template
16x72 mm* (5/8" x 2 7/8")
A
16x107 mm* (5/8" x 4 1/4")
B
19x78 mm* (3/4" x 3 1/8")
C
19x109 mm* (3/4" x 4 1/4")
D

24 mm x 24 mm (2 x circle)

*These are maximum mortise lock case (body) lengths, unless radius ends are squared with a chisel. Actual length of mortise is 7mm longer.

Product Image Product Ref Diagram No Description Quantity Required Price for 1
GB/COLL/1630 - Guide Bush Collar 16mm to 30mm GB/COLL/1630 016

Aluminium collar to fit guide bushes.

  • Enables single shaped templates to be used to cut perfectly matching pocket & inlay.
  • Collars have integral rubber 'O' rings to ensure collar secures onto guide bush.
  • Templates should be made with suitable sized corners for the collar being used.
  • The correct diameter straight cutter as indicated should always be used.
  • Guide bush not included.
1 €10.70
MAG/PACK/1 - Magnet pack 15mm x 3mm pack of Four MAG/PACK/1 015

These magnets are nickel plated and incredibly strong making them ideal for a variety of workshop applications with endless possibilities.

  • Nickel coated Neodymium Iron Boron.
1 €14.93
WP-LOCK/02 - Lock Jig clamp bar WP-LOCK/02 002

Replacement clamp bar for the LOCK/JIG.

    1 €41.57
    WP-LOCK/03 - Lock Jig spacer finger WP-LOCK/03 003

    Replacement spacer finger for the LOCK/JIG.

      6 €2.35
      WP-LOCK/04 - Lock Jig mini knob 15mm diameter M5 WP-LOCK/04 004

      Replacement mini knob for the LOCK/JIG.

        2 €6.82
        WP-LOCK/05 - Lock Jig adjustable lever M8 WP-LOCK/05 005

        Replacement adjustable lever M8 for the LOCK/JIG.

          3 €8.94
          WP-LOCK/06A - Lock jig knob M10 x 40 ball end WP-LOCK/06A 006

          Replacement knob for the LOCK/JIG.

            2 €10.26
            WP-LOCK/08A - Plastic cap for ball end stud WP-LOCK/08A 008

            Replacement plastic cap for the LOCK/JIG.

              2 €2.35
              WP-LOCK/T/1 - Lock Template 22.2mm x 156mm faceplate WP-LOCK/T/1 013

              Replacement face plate template 1 for the LOCK/JIG.

                1 €12.22
                WP-LOCK/T/10 - Lock Template 25.4mm x 177mm faceplate WP-LOCK/T/10 013

                Replacement face plate template 10 for the LOCK/JIG.

                  1 €12.22
                  WP-LOCK/T/11 - Lock template 26 x 56.5mm / 25 x 57.5mm faceplate WP-LOCK/T/11 013

                  Replacement latch template for the LOCK/JIG.

                  • This template has two apertures.
                  • Upper aperture for 25 mm x 57.5 mm.
                  • Lower aperture for 26 mm x 56.5 mm.
                  1 €12.22
                  WP-LOCK/T/2 - Lock Template 22.2mm  x 152.5mm faceplate WP-LOCK/T/2 013

                  Replacement face plate template 2 for the LOCK/JIG.

                    1 €15.14
                    WP-LOCK/T/201 - Lock Template 24mm x 24mm (2 x circles) faceplate WP-LOCK/T/201 013

                    Accessory template for the LOCK/JIG.

                      1 €24.56
                      WP-LOCK/T/3 - Lock Template 25.4mm x 121mm faceplate WP-LOCK/T/3 013

                      Replacement face plate template 3 for the LOCK/JIG.

                        1 €12.22
                        WP-LOCK/T/4 - Lock template 25.4mm x 128mm faceplate WP-LOCK/T/4 013

                        Replacement face plate template 4 for the LOCK/JIG.

                          1 €12.22
                          WP-LOCK/T/5 - Lock template 25.4mm x 133.5mm faceplate WP-LOCK/T/5 013

                          Replacement face plate template 5 for the LOCK/JIG.

                            1 €12.22
                            WP-LOCK/T/6 - Lock template 25.4mm x 145mm faceplate WP-LOCK/T/6 013

                            Replacement face plate template 6 for the LOCK/JIG.

                              1 €12.22
                              WP-LOCK/T/7 - Lock template 25.4mm x 153mm faceplate WP-LOCK/T/7 013

                              Replacement face plate template 7 for the LOCK/JIG.

                                1 €12.22
                                WP-LOCK/T/8 - Lock template 25.4mm x 156mm faceplate WP-LOCK/T/8 013

                                Replacement face plate template 8 for the LOCK/JIG.

                                  1 €12.22
                                  WP-LOCK/T/9 - Lock template 25.4mm x 165.5mm faceplate WP-LOCK/T/9 013

                                  Replacement face plate template 9 for the LOCK/JIG.

                                    1 €15.14
                                    WP-LOCK/T/A - Lock template 16mm x 79mm mortise WP-LOCK/T/A 012

                                    Replacement mortise template A for the LOCK/JIG.

                                      1 €12.22
                                      WP-LOCK/T/B - Lock template 16mm x 107mm mortise WP-LOCK/T/B 012

                                      Replacement mortise template B for the LOCK/JIG.

                                        1 €12.22
                                        WP-LOCK/T/C - Lock template 19mm x 78.0mm mortise WP-LOCK/T/C 012

                                        Replacement mortise template C for the LOCK/JIG.

                                          1 €12.22
                                          WP-LOCK/T/D - Lock template 19mm x 109mm mortise WP-LOCK/T/D 012

                                          Replacement mortise template D for the LOCK/JIG.

                                            1 €12.22
                                            WP-LOCK/T/LUP - LOCK/JIG line up template WP-LOCK/T/LUP 017

                                            Line up template for LOCK/JIG.

                                            • Allows jig to be positioned more centrally on door.
                                            1 €16.62
                                            WP-LOCK/T/SET - Lock template set (16 pieces) WP-LOCK/T/SET 014

                                            Pack of 16 templates as supplied in standard Lock Jig. Comprises of face templates 1-12 & mortise templates A-D.

                                              1 €144.14
                                              WP-SCW/69 - M4 x 10mm countersunk Pozi machine screw WP-SCW/69 010

                                              Replacement machine screw.

                                                2 €1.19
                                                WP-WASH/29 - Washer split spring for M5 WP-WASH/29 011

                                                Replacement washer.

                                                  2 €1.24

                                                  Product Questions

                                                  The standard radius produced with our lock jig is 6mm this is the radius from a 12mm diameter cutter. A 10mm radius can be obtained with a 20mm cutter C030A in conjunction with a GB240 24mm guide bush.

                                                  ... Read more

                                                  The fingers on the Lock Jig allow the jig to be lifted off the door edge by up to 6mm. This prevents the guide bush from catching the door.

                                                  ... Read more

                                                  The GB30A should not be used on thin internal doors as the guide bush can contact the jig body. We advise GB30 with 6mm spigot length is used.

                                                  ... Read more

                                                  Yes and no because although the mortise could be recessed the faceplate would require some work with a chisel to finish it off. Also special sizes of plate may be required.

                                                  ... Read more

                                                  No you can use the collar that comes included with the Lock Jig. This fits over the top of the GB160, which will then increase the diameter to 30mm.

                                                  ... Read more

                                                  Yes, there is an insert that is placed in the jig which reduces the aperture length.

                                                  ... Read more

                                                  Yes we have a wide selection of other sizes available. Please call our technical department with your lock dimensions.

                                                  ... Read more

                                                  Yes, available from stock, the part number is WP-LOCK/T/14.

                                                  ... Read more

                                                  For the small latches used on cupboard doors, the two different sizes are to accommodate metric or imperial sizes.

                                                  ... Read more

                                                  You can cut out the remainder of the depth by using a auger bit.

                                                  ... Read more
                                                  Write Your Own Question
                                                  Your Question: