Group

PCD/FSB/1154 - Fibreboard sawblade PCD 115mm x 4T x 9.5mm

PCD/FSB/1154
€50.15

PCD sawblade for use on cement fibre board and tool-wearing material eg laminate, solid wood and ultra hard materials.

  • Precision EDM ground high-quality industrial polycrystalline diamond cutting tips.
  • Flat tooth with chamfer (Triple Chip Grind) tips for cleaner cut.
  • Laser cut hardened body.
  • Longer life, faster cleaner cuts with less dust.
  • Up to 60 times longer life when compared to TCT blades.
  • Ideal for Hardie-Board cladding, Aqua board, Minerit, Eternit and MDF.
  • Portable, bench and mitre saw use.
  • Suitable for Dewalt DCS571N-XJ

PCD Sawblades

Shop a variety of Polycrystalline Diamond Tipped sawblades with different tooth forms, tooth counts and hook angles for circular, mitre and plunge saws. Designed to cut composite decking, fibre cement board/cladding, carbon fibre-reinforced polymer, glass-reinforced plastic, compact laminate and MDF.

PCDPCD

Polycrystalline Diamond Tips

Precision Ground Alloy Steel BodyPrecision Ground Alloy Steel Body

Precision Ground Alloy Steel Body

Body HardenedBody Hardened

Hardened & Tempered for Optimum Accuracy

High Perfomance & Long Life

Precision borePrecision bore

Precision Bore

Features

Polycrystalline Diamond (PCD) Tips for precision EDM-ground for optimum edge retention and cut quality.

The Triple Chip Ground Profile with +12° Hook for a clean, controlled, efficient cutting action through tough and brittle materials.

Laser Cut Alloy Steel Plate is hardened and tempered to minimise deflection.

Expansion Slots reduce noise and vibration and assist with heat dissipation.

Reamed Bore ensures precise spindle fit.

Etched Blade Information to EN847 safety standard.


Detail

  • Polycrystalline Diamond (PCD) Tips precision EDM-ground for optimum edge retention and cut quality in the most abrasive sheet materials.
  • Triple Chip Ground Profile (TCG) with +12° Hook for a clean, controlled, efficient cutting action through tough and brittle materials.
  • Laser Cut Alloy Steel Plate is hardened and tempered to minimise deflection under load for assured accuracy.
  • Expansion Slots reduce noise and vibration, and assist with heat dissipation to prevent warping to maximise cut quality.
  • Etched Blade Information to EN847 safety standard.
  • Reamed Bore ensures precise spindle fit.

Featured Products


Discover more about Trend Sawblades

Sawblade Range Information

Sawblade Range SpotlightSawblade Range Spotlight

Sawblade Products

Shop Trend SawbladesShop Trend Sawblades

Sawblade Videos

Watch Trend Sawblade VideosWatch Trend Sawblade Videos
D1
4 1/2 inches
D1
115 mm
Bore
9.5 mm
Kerf
1.6 mm
Plate thick
1.2 mm
No. of Teeth
4
Tooth form
TCG
Hook
12 degrees
Quick Selector No.
M6
Cut Finish
Coarse
Max rpm
12000

It is recommended that the blade should not project more than 1mm out of bottom of substrate.

Dewalt DCS571N-XJ

no spare products

Videos

Trend PCD Saw Blades

This video shows the key features of our PCD Saw Blades.

Circular Sawblade Maintenance Guide Video

Trend Circular Saw Blade Maintenance Guide.

Product Questions

Write Your Own Question
Your Question: