SNAP/BH/M/A - Trend Snappy micro diameter bit holder 150x10.8mm

Magnetic holder for 1/4-inch hex 25mm insert bits.

• Micro diameter body.
• Small 10.8mm diameter to allow access into tighter spaces.
• Pull back ring to release bits, spring-loaded release of bit.
• Tested to 50 Nm torque.
• Extra strong magnet N50 (Gauss 3900-4000) to minimise bit loss due to the bits sticking to the screw.
• Stainless steel housing.
• Due to its small diameter the bit holder should not be used on long screws that require a high torque.