We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
TEMP/LR/A - Template lock recess
TEMP/LR/A
Clear plastic template for use with any plunge router to accurately fit 2, 3 and 5 lever sash and dead mortise locks.
- Clear plastic with magnets to hold metal templates.
- Includes six recess and three mortise templates.
- Requires 12mm diameter x 63mm cut length cutter with 1/2 inch shank and 30mm guide bush. A 1/4 inch extra long cutter can also be used but deepening of mortise with auger bit will be required.
- User made batten 44mm x 34mm x 450mm is also needed.
- Suitable for following locks Additions H32306, H32331, Chubb 3U75, 3G114, ERA 196-62, 201-31, 201-32, 202-32, 208-31, 221-31, 301-32T, 302-32T, 467-32T, 471-32T, 571-32T, latch, ES bed latch, Jewson LISJK072, LISJK100, Legge P3751, P1645, Travis Perkins P19, P20, P22 (802503), P29 (802510), P81, Union L99, Y2201, Y2294 and Yale PM246, PM320 and PM550.
- Magnets in the template frame are to hold the metal templates.
- Design Reg. No. 00132246-002.
- Router not included.
- Size
- 320 mm x 135 mm x 8 mm
- Imperial (Metric) (D x OL)
- Template
- Imperial (Metric) (D x OL)
- Template
- 22.2x156 mm (7/8"x 6 1/8")
- 1
- 22.5x152.5 mm (7/8"x 6 " )
- 2
- 25.4x133.5 mm (1"x 5 1/4" )
- 5
- 25.4x153 mm (1"x 6")
- 7
- 26x162mm
- 12
- 25.1x58mm (ERA)
- 15
Mortise dimensions
- 16x107 mm* (5/8" x 4 1/4")
- B
- 19x78 mm* (3/4" x 3 1/8")
- C
- 16x90 mm*
- E
*These are maximum mortise lock case (body) lengths, unless radius ends are squared with a chisel. Actual length of mortise is 7mm longer.
no spare products