Group

866X1/2TC - Finger jointer

866X1/2TC
€161.36

Finger Jointer combines an assembley of five TCT slotting cutters with an abutting-edge cutter to produce a profile that extends the glue line threefold, resulting in an extremely strong joint.

  • The Finger Jointer fits into any portable or stationary router with a 1/2 inch collet.
  • Performing the cut
  • Timber must be machined square.
  • The cutters should be assembled to match the spindle rotation, and be stacked at 90 degrees to one another to ease stress on the tool.
D
40 mm
B
28 mm
E
6.0 mm
OL
96 mm
Shank Diameter
1/2 inch
Timber thickness min.
11 mm
Timber thickness max.
36 mm
Product Image Product Ref Diagram No Description Quantity Required Price for 1
BB28 - Bearing 28mm diameter 8mm bore BB28 B

Bearings are shielded to prevent penetration of dust and grease packed for life.

  • They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure.
  • Scrape off any resin build-up.
  • Always check the tightness of the fixing screw before using cutter.
1 €22.78
SPAC/8/34 - Spacer 8mm bore x 3.4mm thick SPAC/8/34 E

Replacement 8mm bore X 3.4mm thick spacer.

    6 €2.80

    Videos

    Bearing Guided Cutter Video

    Our video guide on how to use your bearing guided cutters, the different types and applications.

    Product Questions

    Using five cutters the minimum material thickness is 31mm, and maximum material thickness is 36mm. For less cutters consult the catalogue or cutter instructions.

    ... Read more
    Write Your Own Question
    Your Question: