Group

C115AX1/4TC - Self guided trimmer 9.5mm diameter

C115AX1/4TC
€29.23

Trend Craft Pro 1/4in shank bearing guided flush trimming cutter - 9.5mm diameter Two Flute Carbide tips.

  • Two flute carbide TCT tips for clean, professional finish on timber lippings, plastic laminates and veneers.
  • 9.5mm diameter X 25.4mm cutting depth bottom bearing guided trimmer. Accurately and cleanly flush trims laminate and veneer work.
  • 1/4in shank for smaller routers and easy control for hand held trimming use on curved and straight edge work or to follow templates.
  • PTFE coating to minimise heat and resin build up for increased cutter performance and longevity.
  • 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices.
D
3/8 inch
D
9.5 mm
C
1 inch
C
24.5 mm
B
9.5 mm
A
90 degrees
OL
75 mm
Shank Diameter
1/4 inch
Product Image Product Ref Diagram No Description Quantity Required Price for 1
B95A - Bearing 3/8" diameter 3/16" bore B95A

Bearings are shielded to prevent penetration of dust and grease packed for life.

  • They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure.
  • Scrape off any resin build-up.
  • Always check the tightness of the fixing screw before using cutter.
€9.86
SP-I - Spare part pack SP-I

Spare part packs make ordering spares easier.

  • Packs include, hex key (if required), screw, washer and shield (if required).
€4.26

Videos

Bearing Guided Cutter Video

Our video guide on how to use your bearing guided cutters, the different types and applications.

Product Questions

Write Your Own Question
Your Question: