Group

C049X8MMTC - Self guided chamfer angle=45 degrees x 12.7mm Cut

C049X8MMTC
€44.50

Self-guiding chamfer/bevel cutter.

  • Bearing follows the board beneath.
D
32 mm
C
1/2 inch
C
12.7 mm
B
9.5 mm
A
45 degrees
OL
62 mm
Shank Diameter
8 mm
Product Image Product Ref Diagram No Description Quantity Required Price for 1
B95A - Bearing 3/8" diameter 3/16" bore B95A

Bearings are shielded to prevent penetration of dust and grease packed for life.

  • They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure.
  • Scrape off any resin build-up.
  • Always check the tightness of the fixing screw before using cutter.
€9.86
SP-I - Spare part pack SP-I

Spare part packs make ordering spares easier.

  • Packs include, hex key (if required), screw, washer and shield (if required).
€4.26

Videos

Bearing Guided Cutter Video

Our video guide on how to use your bearing guided cutters, the different types and applications.

Product Questions

Write Your Own Question
Your Question: