We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Frequently Asked Questions
I have two oval washers with knobs and springs, left over from my WRT table assembly can you tell me what they are for?
These two components lock the two square bars in on the top of the backfence of the router table these pack the outffeed fence out to allow planing of material they are two different sizes 1.4mm and 2.4mm.
Created by Technical Support Team
Was this article helpful ?
Category
- Routers FAQs
- Router Cutters FAQs
- Safety & PPE FAQs
- Tool Storage FAQs
- Routing Workshop Jigs FAQs
- Router Tables FAQs
- Routing On-site Jig FAQs
- Routing Accessories FAQs
- Dust Extraction FAQs
- Power Tool Accessories
- Drilling FAQs
- Trend Snappy FAQs
- Clamping FAQs
- Abrasives FAQs
- Sawblade FAQs
- Planer, Jigsaw & Multitool FAQs
- Sharpening & Tool Care FAQs
- Measuring & Hand Tools FAQs
- CNC Machining FAQs
- Catalogues & Books FAQs
- Spare Parts FAQs
Tags
- Routing (34)
- Clamping (1)
- product (6)
- (29)
- Compatibility (25)
- Sharpening (2)
- Sharpening (3)
- Screws (3)
- Countersinks (3)
- Substances (3)
- Filters (8)
- Materials (10)
- Radius (4)
- Replacement (3)
- Jointing (14)
- Kitchen Fitting (10)
- Cutting Speed (1)
- Smartbench (1)
- Scribing (1)
- Shipping (1)
- Respirators (1)
- Repair (1)
- Life expectancy (1)
- Respirators (16)
- Dividers (1)
- Batteries (4)
- Biscuit Jointing (4)
- Jig Making (1)
- CNC Machining (7)
- Templating (1)
- Repairs (1)
- Holding The Workpiece (1)
- Cutter Sets (1)
- Bearings (1)
- Mortise & Tenon (1)
- Auger Bits (1)
- Flat Bits (1)
- Drilling (1)
- Hex Keys (1)
- Plug Cutters (1)
- Drill Bit Guides (1)
- Door Fitting (18)
- Grub Screws (1)
- Kitchen Fitting (2)
- Cleaning (3)
- Accessories (1)
- Power Wattage (1)
- Container Volume (1)
- Noise Rating (1)
- Cleaning (2)
- Templates (1)
- Stair Jig (4)
- T Slot Track (1)
- Parallel Groove (1)
- Bore Size (1)
- Modification (1)
- Maintenance (6)
- Modification (3)
- Rebating (1)
- Jointing (2)
- Torx Screw (1)
- Line-up Pin (3)
- Guide Bush (4)
- Materials (3)
- Replacement (1)
- Countersinks (1)
- Thread (2)
- Measurements (1)
- Angle (1)
- Routing (1)
- Contents (1)
- Door Fitting (1)
- storage (1)
- guide bushes (1)
- worktop (6)
- collet (1)
- spindle moulding (1)
- bearing (1)
- rpe (2)
- hinges (2)
- door (1)
- Frames (1)
- Hinges (2)
- Worktop (6)
- Filter (1)
- Protection (1)
- Dust Extractor (2)
- Warranty (1)
- Router Table (2)