C121AX8MMTC - Template profile 16.0mm diameter


Shank mounted bearing profilers are ideal for template guidance.

  • Use for rebating and trimming edges only.
  • Extra care must be taken to avoid cutter breakage.
5/8 inch
16 mm
3/4 inch
19 mm
65 mm
Shank Diameter
8 mm
Product Image Product Ref Diagram No Description Quantity Required Price for 1
BB16 - Bearing 16mm diameter 8mm bore BB16

Bearings are shielded to prevent penetration of dust and grease packed for life.

  • They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure.
  • Scrape off any resin build-up.
  • Always check the tightness of the fixing screw before using cutter.
COLL/8 - Collar pack COLL/8

Collar Packs are used for cutters with shank mounted bearings.

  • Packs include one collar, grub screw and hex key.

Product Questions

Write Your Own Question
Your Question: