Group

C165X1/2TC - Profiler 19.1mm diameter X19.1mm cut

C165X1/2TC
€42.53

Trend Craft Pro 1/2in shank bearing guided flush trimming cutter - 19.1mm diameter Two Flute Carbide tips.

  • Two flute carbide TCT tips for clean, professional finish on timber, plastic laminates and veneers.
  • Shank mounted bearing allows good vision of templates for easy and accurate following when hand held routing.
  • 1/2in shank for heavy duty use on curved and straight edge work ideal for replicating components and shallow rebating with templates.
  • PTFE coating to minimise heat and resin build up for increased cutter performance and longevity.
  • 1/2in shank for use in bigger routers and heavier applications with 'K'mark shank to ensure safe working practices.
D
3/4 inch
D
19.1 mm
C
3/4 inch
C
19.1 mm
OL
63.5 mm
Shank Diameter
1/2 inch
Product Image Product Ref Diagram No Description Quantity Required Price for 1
B19C - Bearing 3/4" diameter 1/2" bore B19C

Bearings are shielded to prevent penetration of dust and grease packed for life.

  • They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure.
  • Scrape off any resin build-up.
  • Always check the tightness of the fixing screw before using cutter.
€12.26
COLL/12 - Collar pack COLL/12

Collar Packs are used for cutters with shank mounted bearings.

  • Packs include one collar, grub screw and hex key.
€3.82

Product Questions

Write Your Own Question
Your Question: