CDJ300/05 - Craft dovetail 300mm 1/2 through

Trend Craft Pro 1/4in shank straight router cutter - 5/16in diameter Two Flute Carbide tips

• Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials.
• 8mm wide X 25mm cutting depth with bottom cut feature for increased diversity including light morticing.
• Matched 5/16in imperial diameter, for use with matched fit to imperial dimensions for precise fitting, 1in cut depth for deeper grooving, slotting and morticing in small furniture work.
• PTFE coating to minimise heat and resin build up for increased cutter performance and longevity.
• 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices.

These cutters are for Trend Craft Dovetail Jigs.

Guide bush guides the router when using a template.

• Fits directly to Trend T5E and T9E, and some other light duty routers.
• Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base.

Guide bush guides the router when using a template.

• Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, and some other light duty routers.
• Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base.

Guide bush guides the router when using a template.

• Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, and some other light duty routers.
• Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base.
• This guide bush has a 4mm spigot ideal for use with the Trend CDJ300 dovetail jig.

Replacement comb bracket for the CDJ300.

Edge guide for the CDJ300.

Replacement screw.