Group

CR/KFP/3 - Kitchen Fitters Pack Three

CR/KFP/3
€107.93

Three piece cutter pack with three connecting bolts and ten biscuits aimed at kitchen fitters.

  • Pack includes one 1/2 inch diameter x 50mm cut length worktop cutter, biscuit jointer cutter, three connecting bolts and ten No.20 biscuits.
  • Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods.
  • For housing, grooving and mortising.
  • Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life.
  • Non stick PTFE coated.
D
12.7 mm x 50mm cut
OL
93.5 mm
Shank Diameter
1/2 inch
Shank Diameter
1/2 inch

Please note: This cutter is especially suited for drilling.

Biscuit jointer

D
37.2 mm x 4 mm
OL
64 mm
Product Image Product Ref Diagram No Description Quantity Required Price for 1
BSC/20/100 - Trend No 20 Size Compressed Beech Biscuits - 100 Pack BSC/20/100

Trend biscuits are made of die cut beech.

  • Allows easy construction across a multitude of applications using simple butt joints and slotted biscuit grooves for quickly constructed very strong joints on joinery, furniture and framing.
  • Used with PVA adhesives, the moisture in the glue expands the beech biscuits to form a solid bond that locks any joint tightly for maximum strength.
  • Made from high quality compressed beech in the popular No20 size for heavier construction applications for use on all hard and softwoods, ply, chipboard, MDF, allowing fast, strong connections.
  • Compared to doweling, biscuit jointing is faster and more precise.
€11.56
C152X1/2TC - Biscuit jointer set C152X1/2TC

Trend Craft Pro 1/2in shank bearing guided biscuit cutter - 37.2mm diameter Two Flute Carbide tips.

  • Two flute carbide TCT tips for cutting biscuit slots in timber and timber based materials.
  • Supplied with three interchangeable bearings covering biscuit sizes 0, 10 and 20 covering furniture and joinery applications.
  • 1/2in shank, perfect for bigger routers in trade work environments, including worktop jointing.
  • PTFE coating to minimise heat and resin build up for increased cutter performance and longevity.
  • 1/2in shank for use in bigger routers and heavier applications with 'K'mark shank to ensure safe working practices.
€63.44
C153DX1/2TC - Two flute cutter 12.7mm diameter C153DX1/2TC

Trend Craft Pro 1/2in shank worktop joint cutter - 12.7mm diameter Two Flute Carbide tips.

  • 12.7mm diameter X 50mm cutting depth; the essential cutter for routing post formed joints with worktop jigs in tops up to 40mm thick.
  • Cut crisp and clean precision fit joints every time; especially suited for use on abrasive chipboard core laminate faced worktops.
  • Carbide centre tip profile, ideal for plunging work on abrasive materials with jigs for hob and sink cut-outs.
  • PTFE coating to minimise heat and resin build up for increased cutter performance and longevity.
  • 1/2in shank for use in bigger routers and heavier applications with 'K'mark shank to ensure safe working practices.
€43.49

Product Questions

Write Your Own Question
Your Question: