Group

C166X12MMTC - Profiler 19.1mm diameter x 50mm cut

C166X12MMTC
€68.86

Shank mounted bearing profilers are ideal for template guidance.

  • Use for rebating and trimming edges only.
  • Extra care must be taken to avoid cutter breakage.
D
3/4 inch
D
19.1 mm
C
1 31/32 inch
C
50 mm
OL
94.5 mm
Shank Diameter
12 mm
Product Image Product Ref Diagram No Description Quantity Required Price for 1
B19C - Bearing 3/4" diameter 1/2" bore B19C

Bearings are shielded to prevent penetration of dust and grease packed for life.

  • They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure.
  • Scrape off any resin build-up.
  • Always check the tightness of the fixing screw before using cutter.
€11.90
COLL/12 - Collar pack COLL/12

Collar Packs are used for cutters with shank mounted bearings.

  • Packs include one collar, grub screw and hex key.
€3.82

Product Questions

Write Your Own Question
Your Question: